Oscilloscope Analyzer

This portable tester is suitable for diagnosis and measurement of the various ignition systems. The device automatically detects the measurement signals and sets all parameters so that a quick and safe diagnosis is performed within seconds and all necessary information can be called up on the display.

The power supply of the device is ensured by a rechargeable battery (LiFePO4 battery) for up to 8 hours.

Technical data:

• Display: color 3.5 "TFT (320x240 pixels) with backlighting
• Probe: 30 cm length with interchangeable COP and SPW measuring tips
• Dimensions: 165 mm x 124 mm x 36 mm (without probe)
• Weight: 420 g (without probe)

Application examples:

• Interruption in high voltage circuit
• Missing compression of cylinders
• Dirty spark plug/ contact resistance
• Defective primary or secondary winding

RPM measurement:

• Range: 120 to 19,999 rpm
• Resolution: 1 U/ min
• Accuracy: ± 0.5% + 1 LSD

Ignition voltage:

• Range: 0 to 50 kV
• Resolution: 0.1 kV
• Repeatability: ± 0.2 kV
  

Spark duration:

• Range: 0 to 10.0 mS
• Resolution: 0.1 mS
• Accuracy: ± 0.1 ms + 1 LSD

Primary current start-up time (COP mode):

• Range: 0 to 10.0 mS
• Resolution: 0.1 mS
• Accuracy: ± 0.1 ms + 1 LSD

Closing angle - dwell time (ignition cable):

• Range: 0 to 10.0 mS
• Resolution: 0.1 mS
• Accuracy: ± 0.1 ms + 1 LSD

Scope of delivery:

• 1 x Ignition oscilloscope with protective rubber cover
• 1 x Movable probe
• 1 x Ignition coil measuring tip (COP)
• 1 x Ignition cable measuring tip (SPW)
• 1 x USB micro cable
• 1 x AC charger adapter
• 1 x Hard case