This portable tester is suitable for diagnosis and measurement of the various ignition systems. The device automatically detects the measurement signals and sets all parameters so that a quick and safe diagnosis is performed within seconds and all necessary information can be called up on the display.
The power supply of the device is ensured by a rechargeable battery (LiFePO4 battery) for up to 8 hours.
Technical data:
- Display: color 3.5 "TFT (320x240 pixels) with backlighting
- Probe: 30 cm length with interchangeable COP and SPW measuring tips
- Dimensions: 165 mm x 124 mm x 36 mm (without probe)
- Weight: 420 g (without probe)
Application examples:
- interruption in high voltage circuit
- missing compression of cylinders
- dirty spark plug/ contact resistance
- defective primary or secondary winding
RPM measurement:
- Range: 120 to 19,999 rpm
- resolution: 1 U/ min
- Accuracy: ± 0.5% + 1 LSD
Ignition voltage:
- Range: 0 to 50 kV
- Resolution: 0.1 kV
- Repeatability: ± 0.2 kV
Spark duration:
- Range: 0 to 10.0 mS
- Resolution: 0.1 mS
- Accuracy: ± 0.1 ms + 1 LSD
Primary current start-up time (COP mode):
- Range: 0 to 10.0 mS
- Resolution: 0.1 mS
- Accuracy: ± 0.1 ms + 1 LSD
Closing angle - dwell time (ignition cable):
- Range: 0 to 10.0 mS
- Resolution: 0.1 mS
- Accuracy: ± 0.1 ms + 1 LSD
Scope of delivery:
- 1 x ignition oscilloscope with protective rubber cover
- 1 x movable probe
- 1 x ignition coil measuring tip (COP)
- 1 x ignition cable measuring tip (SPW)
- 1 x USB micro cable
- 1 x AC charger adapter
- 1 x Hard case